Laser engraving security guard ISD Intelligent Security Protection Module
0.01 second level open flame response, making carving production risk-free
Solved the hazard of open flames in the processing of 37% flammable materials and obtained UL certified active protection system
10ms level
response speed
<0.01 times
False alarm rate/thousand hours
Reduce by 86%
material wastage rate
How serious is the risk of open flames, the invisible killer in laser engraving
Industry data warning
37% of consumer grade laser equipment experiences open flame accidents when processing wood/leather
Defects of traditional solutions: relying solely on temperature alarms (lag>500ms), manual response>2 seconds
Pain point scenario
- Equipment safety: The optical system burns down, resulting in a 300% increase in maintenance costs
- Material loss: Workpiece carbonization scrap, scrap rate up to 22%
- Personnel safety: Level 3 burn risk, enterprises face compensation for safety accidents
ISD Solution
- 10ms level response speed
- False alarm rate
- Material loss rate reduced by 86%
Three layer protection architecture+self-developed sensing technology - building a laser safety moat
First layer: Front end detection layer
- Dual spectrum sensing: UV sensor (240nm)+infrared sensor (940nm)
- Self developed blind PMT sensor (quantum efficiency 35% @ 240nm)
Second layer: Intelligent decision-making layer
- AI flame recognition algorithm: dual threshold triggering
- 450nm blue light filter (OD value>6)+time-domain gating technology
Third layer: Execution response layer
- 10ms level emergency stop+sound and light alarm
- Linkage equipment cuts off laser output
Core technical parameters
0. 1m
Detection accuracy solid angle
18×12×8mm
Module volume
'0.5W
Working power consumption
UL certification
safety certification
From family workshops to cultural and creative enterprises - visible benefits of safety protection creation
Case 1: Home DIY Pine Carving
pain spot
When carving complex patterns, wood accumulates heat and ignites, resulting in a waste rate of 22%
Solution
ISD module recognizes flames in 6.7ms, emergency stop in 3ms
benefit
The material loss rate has been reduced to 3%, saving an annual equipment maintenance fee of ¥ 1800+
22%
Pre use scrap rate
→
ISD protection
3%
Waste rate after use
Case 2: Leather hot stamping in cultural and creative studio
pain spot
Small flames of 0.5mm ² are difficult to identify, and manual inspection takes 15% of the time
Solution
Multi spectral fusion detection, zero false alarms under 6000K illumination
benefit
Production efficiency increased by 15%, insurance premiums decreased by 23% after obtaining UL certification
Continuously processing 300 pieces of leather bookmarks with zero accidents, saving nearly 2000 yuan in material costs
Four core advantages - redefining laser engraving safety standards
| Dimension | Traditional solution | ISD Intelligent Security Module |
|---|---|---|
| response speed | >500ms (temperature alarm) | <10ms (dual spectral real-time detection) |
| False alarm rate | >5 times/1000 hours | <0.01 times/thousand hours (composite algorithm) |
| Protection accuracy | Can only detect open flames | Can recognize small flames of 0.5mm ² |
| Integration degree | Independent external device with large volume | 18mm × 12mm × 8mm, suitable for various models |
Equipped with ISD technology - increase the security level of your carving equipment by 3 levels
Applicable scenarios
Wooden handicrafts
Leather customization
Acrylic jewelry
PCB board processing
Collaboration mode
ODM/OEM customization
Whole machine integration
Technical authorization
Consult Now
+86-15623097174
24/7 technical support hotline
Limited time benefits
The top 50 inquiries will receive a 'Laser Safety Operation Manual
ISD product series
Professional laser engraving safety solution
No data available at the moment