Multi light source deep ultraviolet UVC-LED A two-dimensional light field distribution simulation tool

Multi light source deep ultraviolet UVC-LED A two-dimensional light field distribution simulation tool

In common disinfection boxes, In the disinfection bag model, Free setting of deep ultraviolet UVC-LED the quantity of, Optical power and position, Obtain two-dimensional distribution of optical power density on the bottom surface, Guide the evaluation of sterilization effectiveness.

Instructions for Use

• coordinate system: The top center is the coordinate origin

• Please do not use deep ultraviolet UVC-LED The position is set beyond the cube's length, width, and height

• The default optical power used in this tool is the lower limit of the optical power of the lamp bead, You can also modify the optical power value by yourself

1

Set cube size

Define the three-dimensional dimensions of the simulation area

cm
cm
cm
2

Set the light source model

Choose between array modeling or manual modeling method

Modeling through arrays, Settings x and y Number and spacing of directional light beads, Can quickly establish a light source array with a large number of light beads. The manual model can set the light source composed of a few irregularly spaced light beads with irregular light power and spacing.

mW
°
cm
cm
mW
°
cm
cm
3

Set sterilization time

Set simulated sterilization time

4

Set drawing options

Configure heat map display parameters

When there are a large number of lamp beads, There may be a brief lag during the calculation process, Please wait patiently, Do not quickly and repeatedly click the calculation button

calculation result

Two dimensional thermal map of light field distribution